      |
 |
BRACKETS, JOINTS, CLAMPS & END
CAPS
SHOP FITTING/ COMMERCIAL FITTINGS
Q: What grades of stainless steel do you use?
A: We use commercial grades AISI 304 for internal applications and
AISI 316 for external applications. You can mix depending upon the environment
of your installation.
Q: What diameter is the handrail?
A: The handrail has an outside diameter of 42.4mm. (1-5/8")
Q: Are they straight?
A: Yes, all our handrails are straight.
Q: How high should my balustrade be?
A: In accordance with current UK Building Regulations they should
be 1100mm high, but 900mm high if raking (e.g. on stairs).
Q: How thick are the handrails?
A: Our handrails have a wall thickness of 2mm.
Q: I want the banister to go on my left hand wall is this possible?
A: Yes, it can go on either wall depending which way round you put
it. Just turn it around, lengthways.
Q: I want to fit a new handrail. Where do I measure from?
A: If it’s a banister rail replacement, just measure your existing
one. If it’s a balustrade that you're after, please send us your
design in the form of a dimensional sketch or drawing.
Q: Do you sell Chrome rails?
A: No.
Q: Do you have any other types of finish?
A: No, all of our banister rails and stainless steel fittings are
satin polished. We find it perfect for most environments where a contemporary,
stylish handrail is required.
Q: Why don't you do a mirror or bright finish?
A: Do you want to be forever polishing those sticky hand prints off
your lovely handrail?
BRACKETS, JOINTS, CLAMPS & END CAPS
Q: How do I know how many brackets I require?
A: Our recommendation will depend on the length of handrail required.
As a rough guide, we attach 2 brackets to 3-metre banisters and
3 brackets to banister hand rails up to 4.25-metres – but this can be
changed to your individual requirements.
Q: How is the banister ends finished?
A: They are finished with a flat capping plug, but we can offer a
domed plug or a half-round plug. All of our ends are satin / brush finished
to match the tube.
Q: How do attach glass clamps, and brackets to the tube?
A: Please refer to the Assembly page of our website.
Q: How long are your handrails?
A: The handrail is supplied from the tube mills in 6 metre lengths,
but you/ we can cut (or join) them to any required length.
Q: Are the brackets moveable?
A: Not without drilling further holes
Q: Do your handrails require welding? How difficult are they to install?
A: No, our banister handrails are totally weld-free and very easy
to install. They use a push-fit, modular technology that requires a special
adhesive. Most orders (handrail banisters) are pre-prepared in our depot
and require only fixing to the wall.
Glass brackets, tension-wire fixings and rail brackets require the tube to be drilled and sometimes tapped. Stainless steel is a hard material and caution should be exercised when undertaking metal work procedures.
Anyone with a basic knowledge of DIY or any builder should have no problem installing our handrails.
Q: Is the Loctite® 638 / glue strong
enough?
A: Yes, please see the Technical Data Sheets section of the Loctite® website
for a full technical bulletin www.loctite.com
Q: How long does it take to set?
A: Under normal working conditions, the Loctite® 638 will start to
cure in approx 10-30 minutes. This time can be significantly reduced in
warmer environments. Joints should be a fully cured after 24 hours.
Q: Will you fit my order for me?
A: We only supply. Most installations can be facilitated quite easily
using a few hand tools. However, please see the reseller link on our
DIY handrails site for possible installer information. Most builders,
joiners, plumbers, carpenters and proficient DIY’ers should have no problem
in installing STICK-IT.
Q: How do I earth my handrail?
A: The rail is made of stainless steel, earthing should not be required.
Q: Does stainless steel rust?
A: In short, yes. Although stainless steel is a corrosion resistant
material, under certain conditions and without protection, it will
suffer some surface corrosion, most commonly known as ‘tea staining’.
Please see our ‘Installation & Maintenance section’ above
on maintaining your exterior railings.
Q: Do your rails comply with Building Regulation requirements?
A: It is the responsibility of the designer/installer to ensure compliance.
If correctly assembled, and with suitable fixings and reinforcement where
necessary, our handrail system satisfies the loading requirements for
domestic and light commercial use. For installations of commercial use,
please ask for details.
Q: What is the lead time?
A: It’s generally about 7/ 10 working days, although most items are
ex-stock. We allow this time for cutting and preparation.
Q: Do you sell wooden banisters?
A: No
Q: Do you supply infill panels?
A: Yes, we can supply both round bar and wire infill panels. Please
contact us for further information.
Q: How many wires do I need on my balustrade?
A: Please consult current UK Building Regulations. Currently, you
should have one wire for every 100mm gap – e.g. a standard 1.1mtr
high balustrade would require 9 wires.
Q: What size is the wire?
A: The wire is 4mm diameter.
Q: Are the handrails suitable for outdoor use?
A: Yes. You should indicate your intended use when ordering. This
will denote which grade of stainless steel is most suited to your
application. Indoor – AISI 304 Outdoor – AISI 316.
Q: What are the most popular exterior uses?
A: Let your imagination run riot! See the customer showcase area
of our websites for design ideas such as: decking rails, swimming pool
protection, garden enhancement, parapet wall balustrades etc.
SHOP FITTING/ COMMERCIAL FITTINGS
Q: Do you provide handrail systems for shops?
A: Yes, our bespoke handrail systems are ideal for shop fitting designs.
Please contact us to discuss your specification.
Q: Do you do industrial stainless steel fittings as well as 'DIY' handrail
balustrades?
A: Yes, we supply all areas of industry around the world – from home
DIY projects to commercial shop fitting rails. For heavy industry
stainless steel fittings, please see our sister site, www.seagullfittings.co.uk
Q: Do you supply glass?
A: No, we only supply the stainless steel fittings.
Q: What kind of glass should I use?
A: We recommend using toughened or laminated safety glass.
Q: What is the longest sheet of glass I can use?
A: Refer to your glazing supplier.
Q: How many glass clamps do I need per sheet of glass?
A: We recommend a minimum of 4 glass clamps to every square metre
of glass.
Q: What thickness of glass do I need?
A: You can choose from a range of thicknesses from 6mm up to 12mm.
Q: Can I use Perspex as an alternative to glass?
A: Yes you can. You could also consider acrylic, perforated metal
sheet, tensioned wire cables, powder coated metal, stainless steel tube
or bar, and mesh.
Q: Can I buy handrails online?
A: Yes, you can buy a banister handrail online right now at our new
handrail shop.
Q: How can I pay?
A: We accept either cheques or credit and debit cards.
Q: When will I be charged?
A: If you are paying by credit card, you will be charged when the
delivery paperwork is raised. If you are paying by cheque, we require
payment before we start production.
Q: How is it delivered?
A: We send out all orders on a next day carrier service.
Q: When are you open?
A: We are open Monday – Friday from 8.30am – 5.00pm
Q: My delivery was damaged. What can I do?
A: Notify us immediately and we will arrange either a re-work or
replacement.
Q: My delivery hasn't arrived. What can I do?
A: All claims for loss or non-delivery must be advised in writing
within 21 days of the advised despatch date. Please submit claims WITHOUT
DELAY.
Q: I just want a banister rail and I know the length, can I get a fixed
price?
A: Yes, you can buy a banister handrail online right now here at
our new pre-assembled handrail shop!
Q: I purchased from one of your agents, who do I contact for further items?
A: Please contact your original vendor.
Q: Can you send me a brochure?
A: Yes, please email us your address and postcode here.
Q: Can you come out on site and measure up what I would need?
A: Sorry, we don't provide on-site consultation. This enables us
to keep our prices lower.
PLEASE NOTE
As the products detailed on our website may be used for a wide variety of purposes and as the Company has no control over their use, the Company specifically excludes all conditions or warranties expressed or implied by statute or otherwise as to dimensions, properties and/or their fitness for any particular purpose.
Any advice given by the Company to any third party is given for that party’s assistance only and without any liability on the part of the Company.
We are not responsible for the content of any external web site to which we may provide links.
 |
| | Home | FAQ | Contact | Site map | Product range | Applications | Customer showcase | About us | Assembly | Downloads | View cart | |
|
| STICK-IT UK, 90 Roebuck
Lane, West Bromwich, West Midlands, B70 6QX UK Telephone: +44(0) 121 525 0020 · Fax: +44(0) 121 525 1116 · e-mail: sales@stickituk.com · © 2008 STICK-IT UK Website design e-Designscape · Optimization and copywriting NetSeek |